User's Manual

SAFARI
TM
System User’s Guide
1
Chapter 5 – Troubleshooting and FAQs
General LED Status
TERMINAL LED
LED behavior
Descriptions / Remedial Actions
Off
Transceiver Unit is in power-off state.
Steady amber
Transceiver Unit is powering up.
Blinking green
Transceiver Unit is booting up.
Steady green
Transceiver Unit has powered up successfully.
Steady red
System failure during boot up or operation. User action required.
ANTENNA LED
LED behavior
Descriptions / Remedial Actions
Off
ANTENNA status unknown.
Steady amber
ANTENNA is powering up.
Blinking amber
ANTENNA is calibrating.
Blinking green
ANTENNA is scanning for satellite.
Steady green
ANTENNA is tracking a satellite and ready for use.
Steady red
System failure in ANTENNA. User action required.
REGISTERED LED
LED behavior
Descriptions / Remedial Actions
Off
BGAN registration has not started. Network service unknown.
Blinking green
Ready for packet data only.
Steady green
BGAN registration succeeded. Full network service available.
Blinking amber
Ready for voice only.
Steady red
System failure in BGAN network registration. User action required.