User Manual

Brightness
Used to set the brightness level of the Bluetooth Handset display. There are five levels,
from 0 (dimmest) to 5 (brightest).
Backlight
Used to set the duration of the Bluetooth Handset display backlight. Settings ranging
from Off (Backlight permanently off), 5 seconds to 1 minute.
Tone
Used to set the tones for the Keys and Ring tones.
Keytone
Allow you to decide whether the keypad will sound when the keys are pressed.
Ringtone
Allows you to set the ring tone when there is an incoming call. You can adjust the
ring tone volume from this menu as well.
To set the ring tone, select Tone > [your preferred tone] > Ok.
To set the volume level, select Volume > [your preferred level] > Ok.
Bluetooth
Used to set the Bluetooth connectivity with other Bluetooth devices.
For description to connect the Bluetooth Handset to the SABRE1 BGAN Terminal, see
Chapter 3.
About
Shows you the software and hardware versions of the Bluetooth Handset.