User Manual

CF if busy
Diverts incoming calls when you are in the middle of another call.
CF if not available
Diverts incoming calls when your SABRE1 BGAN Terminal is turned off
or outside network coverage.
To enable the any of Call Forwarding above, select the CF type > Enable
> [CF telephone number].
To disable the any of Call Forwarding above, select the CF type > Disable.
Disable all CF
Cancels all divert options.
Call Waiting
If there is an incoming call when you are in the middle of another call, the display
will indicate a call waiting message to alert you. You can enable, disable or view
the status of this feature from this menu.
Call Barring
You can block all incoming or outgoing calls. To enable or disable any of the
following features, you must enter the password provided by the service provider.
All Outgoing
Blocks the dialing of any calls. You can enable or disable this feature from
this menu.
All Incoming
Rejects all incoming calls. You can enable or disable this feature from this
menu.
You can change the password provided by the service provider, select Change
Password > Old Password > New Password.
DHCP Configuration
Shows the status of the SABRE1 BGAN Terminal DHCP configuration. You can enable
or disable this configuration.
DHCP Address Range
Shows you the DHCP Start and Stop Address Range. Default Start Address:
192.168.1.30 and Stop Address: 192.168.1.50.