User Manual

Bluetooth
Shows you the SABRE1 BGAN Terminal Bluetooth settings.
Profile
Shows you the Bluetooth profile in used on the SABRE1 BGAN Terminal.
Security mode
Shows you the Bluetooth security levels available on the SABRE1 BGAN
Terminal. You may select security level 1 (lowest), 2 or 3 (highest).
Discovery mode
Shows you the Bluetooth discovery mode of the SABRE1 BGAN Terminal. You
may select Non Discovery, General or Limited.
Device pairing
Select this to initiate the searching and pairing of Bluetooth devices from the
SABRE1 BGAN Terminal.
A list of Bluetooth devices will be shown, scroll to the device you wish to pair
and press Select > [passkey] > OK.
Paired List
This shows the list of Bluetooth devices already paired with the SABRE1 BGAN
Terminal.
You can Unpair, Authorise and Unauthorise the selected paired device.
My BT device
Shows you the SABRE1 BGAN Terminal Bluetooth device name and its default
PIN. You can edit the SABRE1 BGAN Terminal Bluetooth device name.
Telephony
Shows you the SABRE1 BGAN Terminal Telephony settings.
State
Shows you the SABRE1 BGAN Terminal telephony status. You can change the
status by selecting Enable or Disable.
Caller ID
Shows you the current Caller ID standard selected. You can select either
American or European standard.
[icon] Data
Check status
Shows you the current data connection type selected, its status and IP address on the
SABRE1 BGAN Terminal.