User's Manual

1-6 For Alpha Only
IV. For subsequent use, the SABRE™ I will not acquire a new GPS, it will
prompt the user if the previously stored GPS coordinates should be used.
To use the stored GPS coordinates, use the Up/Down buttons to select
Yes and press ENTER. A GPS indicator will indicate the use of stored
GPS coordinates.
To re-acquire a new GPS, select No and press ENTER. The SABRE™ I
terminal will repeat Step I to III.
V. Press the ENTER button then the LCD will show the signal strength bar.
2.4 Antenna Pointing
I. SABRE™ I is now in Antenna Pointing state.
II. To obtain the maximum possible signal strength, adjust the antenna by
turning and tilting it. For an acceptable services to commence, a signal