User's Manual

1-32 For Alpha Only
7.4.3 IP Transparent Mode:
I. From the LCD, use the Up/Down buttons to select Menu and press
ENTER. Select Settings > Interfaces > Ethernet > Connectivity > IP
Connection and Press ENTER.
II. Use the Up/Down buttons to select Enable and press ENTER.
III. Use the Up/Down buttons to select Authentication > PAP and Press
ENTER. Press RETURN to revert back to the previous menu.
IV. Use the Up/Down buttons to select DNS setting > Dynamic and Press
ENTER.
V. Use the Up/Down buttons to select Connect and Press ENTER.