User's Manual

For Alpha Only 1-31
7.4 Ethernet settings on SABRE I
7.4.1 Defining PDP Context:
I. From the LCD, use the Up/Down buttons to select Menu and press
ENTER. Select Settings > Network > Data > Automatic and Press
ENTER.
7.4.2 TAF Mode: Proceed with the following steps if TAF settings are required:
(Note: By default, the SABRE I is set to TAF mode.)
I. From the LCD, use the Up/Down buttons to select Menu and press
ENTER. Select Settings > Interfaces > Ethernet > Connectivity > TAF
Connection and Press ENTER.
II. Use the Up/Down buttons to select Enable and Press ENTER.
III. From the PC, open the DUN Client - double-click on the DUN Client
icon.
IV. Click Dial to start connection. Username and Password are not required.
V. Open the Internet Browser to begin “Surfing”.