Installation guide

PassFinder AP2620 VoIP Gateway , Release 1.00
AddPac Technology Proprietary & Documentation 47 - 45
Chapter 5. Appendix
Cable Specification
This Appendix provides information about the Pinout specifications of the
following cables used with VoiceFinder AP2620 Gateway.
z Console Port Signal and Pinout (RJ-45 to DB9)
z Ethernet Cable Assemble (RJ-45 to RJ-45) Pinout
[ Console Port Signal & Pinout ]
In order to connect the gateway console port with the Terminal Emulating
PC, the RJ-45 to DB9 (Female DTE Connector) cable is used. The
transferred signal and Pinout specifications are enlisted in the following
table.
<Table 5-1> The transferred signal and Pinout specification
Gateway
Console
(DTE)
RJ-45 DB-9
Console Device
(PC)
Signal RJ-45 Pin DB-9 Pin Signal
RTS 1 8
CTS
DTR 2 6 DSR
TxD 3 2 RxD
GND 4 5 GND
GND 5 5 GND
RxD 6 3 TxD
DSR 7 4 DTR
CTS 8 7 RTS