Installation guide

PassFinder AP2620 VoIP Gateway , Release 1.00
AddPac Technology Proprietary & Documentation 47 - 29
Prerequisites for Network Connection
Observe EIA standards and distance limitations when installing the
Gateway
The following section describes the synchronous serial cable,
Ethernet Cable and the Console Cable VoiceFinder AP2620
supports.
Preparation for Installation
Unless ordered in advance, the tools and certain cables are not provided in
the package. Prepare the following equipments and tools before the
installation
.
z Standard screwdriver set
z Cable for LAN and serial port
9 RJ-45 to RJ-45 cable for LAN port
9 RS-232c console cable with RJ-45 connector (included in the
package)
z Cable for Phone port
9 Telephone line with RJ-11 connector
z PC with Console Terminal or Communication Emulator application (The
Hyper Terminal Program in Windows will suffice. Configure it as :
9,600 Baud, No Parity, 8Bit Data 1Stop Bit)