Installation guide

PassFinder AP2620 VoIP Gateway , Release 1.00
AddPac Technology Proprietary & Documentation 47 - 26
Chapter 2. Before VoiceFinder AP2620
Installation
Installation Requirements
The following is the recommendation for safe operation of the
equipment.
z Ensure the AP2620 VoIP Gateway is in a dust-free environment
before and after installation.
z Ensure the AP2620 cover is opened on a flat and safe surface.
z To prevent accidents, avoid ties, scarf, sleeves, and any other
loose clothing from entangling with the Chassis.
z Avoid any actions that may effect the equipment or the operator.
Electrical Requirements
There are two main sources of electrical problems with the AP2620 :
the power supply and static electricity.
This section describes safety recommendations for each case.
z Electrical Safety
9 In case of the occurrence of an electrical accident, operate
at a position where immediate shut-off of power supply is
possible.
9 Switch the power off when installing or taking the cover off
the equipment.