Installation guide

PassFinder AP2620 VoIP Gateway , Release 1.00
AddPac Technology Proprietary & Documentation 47 - 11
VoiceFinder AP2620 Gateway Hardware Specification
<Table 1-1> VoiceFinder AP2620 Hardware Specification
Microprocessor PowerPC RISC Microprocessor
Flash Memory 4Mbyte
SDRAM Memory 32Mbyte High-Speed SDRAM
Memory
Boot Memory 512Kbyte Flash Memory
Fixed LAN Port Two(2) 10/100Mbps Fast Ethernet
Console Port One(1) RS-232C Interface
Network Interface
Module
Number of Slot Two(2) Interface Slots
AP-FXS4 4-Port FXS Voice Interface Module (4 x RJ11)
AP-FXO4 4-Port FXO Voice Interface Module (4 x RJ11)
AP-E&M4 4-Port E&M Voice Interface Module (4 x RJ11)
AP-FXS2O2 2-FXO & 2-FXS Voice Interface Module (4 x RJ11)
APV1-1E1 1-Port PBX Digital E1 Module (1 x RJ45)
APV1-1T1 1-Port PBX Digital T1 Module (1 x RJ45)
AP-AUDIO2 Audio Module(4 x 3.5mm Female)
AP-AUD1S3 Audio/Voice Module(2 x 3.5mm Female/ 3 x RJ11)
AP-AUD1S2O1 Audio/Voice Module(2 x 3.5mm Female/ 3 x RJ11)
AP-AUD1O3 Audio/Voice Module(2 x 3.5mm Female/ 3 x RJ11)
AP-MP3 High Quality Audio Module(4 x 3.5mm Female)
Voice Interface
Module
AP-HQA
Hi
g
h Quality VoIP Audio Broadcastin
g
Interface
Module(2 x 3.5mm Female/ PSB)
Video Interface
Module
AP-AV500
Video & Audio Encoder/Decoder Interface Module
(2 × 3.5mm Female/ 2×RCA/ PSB)
Power Requirement VAC 110~220V, 50/60Hz, 25Watt
Operating Temp 0°C to + 50°C (32° to 122°F)
Relative Humidity 5% to 95% (Non-condensing)
Dimensions(H x W x D) 44 x 444 x 220(mm) - 19" Rack Mountable Chassis
Weight(kg) 2.2Kg