PassFinder AP2620 VoIP Gateway , Release 1.00 VoiceFinder AP2620 Gateway Rear Part AP2620 VoIP Gateway’s rear view adapts external architecture for user friendly cable and power switch working. [ Figure 1-4 VoiceFinder AP2620 Rear View ]
VoiceFinder AP2620 Gateway Rear View Interface Description No. Label Description With the provided console cable, connect ① CONSOLE with the PC for equipment configuration. Mandatory for initial setting. ② LAN0 RJ45/LAN0 Ethernet Interface.PassFinder AP2620 VoIP Gateway , Release 1.00 Voice Processing Interface The multi-service network modules of AP2620 VoIP Gateway are optional and can be selected according to users’ network. Multi-service network modules for high quality multimedia solution can be divided as follows.
PassFinder AP2620 VoIP Gateway , Release 1.00 4-Port FXS Voice Interface Module AP2620 VoIP Gateway offers 4 channel Foreign Exchange Station (FXS) to connect ordinary telephones and PBX directly. [ Figure 1-5 AP-FXS4 card for AP2620 ] 4-Port FXO Voice Interface Module AP2620 VoIP Gateway offers 4 channel Foreign Exchange Office (FXO) to connect the switching office of Public Switched Telephone Network (PSTN) or ordinary telephones.
PassFinder AP2620 VoIP Gateway , Release 1.00 4-port-FXO2S2 offers various voice service with 2- channel FXS voice interface and 2- channel FXO interface in one module. [ Figure 1-7 AP-FXS2O2 for AP2620 ] 4-Port E&M Voice Interface Module AP2620 VoIP Gateway supports 4 channel voice service module of recEieve and transMit (E&M). This analog E&M Interface is used to connect Trunk line of PBX.
PassFinder AP2620 VoIP Gateway , Release 1.00 voice channels. [ Figure 1-9 APV1-1E1 card for AP2620 ] Digital T1 Voice Interface Module VoiceFinder AP2620 VoIP Gateway supports digital T1 voice processing module for PBX interworking. Digital T1 Interface module supports ISDN-PRI, MFC-R2, DTMF and accommodate maximum 23 voice channels.
PassFinder AP2620 VoIP Gateway , Release 1.
PassFinder AP2620 VoIP Gateway , Release 1.00 2-Channel Audio Broadcasting Module VoiceFinder AP2620 VoIP Gateway supports standard Audio processing module. AP-Audio2 standard broadcasting module supports 2-channel Audio In/Out using high performance DSP for VoIP broadcasting service. [ Figure 1-11 AP-AUDIO2 card for AP2620 ] 1-Channel Audio, 3-Port FXS Module VoiceFinder AP2620 VoIP Gateway supports high performance audio/voice integrated module.
PassFinder AP2620 VoIP Gateway , Release 1.00 1-Channel Audio, 3-Port FXO Module VoiceFinder AP2620 VoIP Gateway supports high performance audio/voice integrated module. AP-AUD1S3 broadcasting module supports 1-channel Audio In/Out and 3-FXO ports for VoIP broadcasting service and VoIP call. [ Figure 1-13 AP-AUD1O3 card for AP2620 ] 1-Channel Audio, 2-Port FXS, 1-Port FXO Module VoiceFinder AP2620 VoIP Gateway supports high performance audio/voice integrated module.
PassFinder AP2620 VoIP Gateway , Release 1.00 VoiceFinder AP2620 VoIP Gateway supports high performance MP3 broadcasting module for high quality music broadcasting service. AP-MP3 broadcasting module features 1-channel MP3 In/Out for high quality VoIP broadcasting service. User can use MIC and Linein as Input channels and Headphone and Line-out as output channels.
PassFinder AP2620 VoIP Gateway , Release 1.00 1-Channel Audio&Video Encoder/Decoder Module VoiceFinder AP2620 VoIP Gateway supports high performance video & audio encoding/decoding interface module. AP-AV500 broadcasting module provides high quality AV broadcasting service using 1-channel Audio, Video In/Out. User can use MIC/Line-in as audio input channels, DVD/TV/Camera as video input channels. Line-out/Headphone as video input channels, and TV/Monitor as video output channels.
PassFinder AP2620 VoIP Gateway , Release 1.00 Chapter 2. Before VoiceFinder AP2620 Installation Installation Requirements The following is the recommendation for safe operation of the equipment. z Ensure the AP2620 VoIP Gateway is in a dust-free environment before and after installation. z Ensure the AP2620 cover is opened on a flat and safe surface. z To prevent accidents, avoid ties, scarf, sleeves, and any other loose clothing from entangling with the Chassis.
PassFinder AP2620 VoIP Gateway , Release 1.00 9 Avoid operating the equipment alone at a potentially dangerous environment. 9 Do not assume the power is switched off, but always confirm the power status. 9 Be extremely cautious when operating in a humid environment or with an uncovered power extension cable.
PassFinder AP2620 VoIP Gateway , Release 1.00 z Prevention of Static Electricity 9 The main chip-set of the Gateway are very delicate and misuse may result in static electrical damage. 9 If a static prevention waist strap is available, strap it around the wrist and earth the cord before operating the equipment. 9 If no waist tap is available, earthing by holding a metal part of the Chassis will help prevent static electricity.
PassFinder AP2620 VoIP Gateway , Release 1.00 Prerequisites for Network Connection Observe EIA standards and distance limitations when installing the Gateway The following section describes the synchronous serial cable, Ethernet Cable and the Console Cable VoiceFinder AP2620 supports. Preparation for Installation Unless ordered in advance, the tools and certain cables are not provided in the package. Prepare the following equipments and tools before the installation.
PassFinder AP2620 VoIP Gateway , Release 1.00 Ethernet Port AP2620 VoIP Gateway has two(2) RJ45 type Ethernet Ports and LEDs of the ports on the front panel. Make sure to use specified cable and connectors to use the ports. RS-232C Serial Console Port AP2620 VoIP Gateway has RJ-45 type RS-232C Female DCE connector interface on the front panel. This port is used for Initial Configuration, monitoring and debugging of the Gateway. Make sure to use specified cable and connectors to use the port.
PassFinder AP2620 VoIP Gateway , Release 1.00 Unpacking Before unpacking, check for external damage of the packaging box . If an external damage of the packaging has been found, please contact AddPac Technology Co. Ltd. sales department (sales@addpac.com, tel : +82-2-568-3848) for an immediate exchange of product. If no external damage has found, confirm if the following items are enclosed. No.
PassFinder AP2620 VoIP Gateway , Release 1.
PassFinder AP2620 VoIP Gateway , Release 1.00 Chapter 3. VoiceFinder AP2620 Installation Async Serial Interface Connection z Connect the console port in the rear side of the Gateway with the serial port of the prepared console terminal. (Refer to [Figure 3.1]) Use the console cable provided with the package. If using a PC as the console terminal, connect to the Ethernet port of the PC.
PassFinder AP2620 VoIP Gateway , Release 1.00 Ethernet Interface Connection z Connect the network to the desired port using RJ-45 connector. Below figure shows a network config with LAN0 for WAN, LAN1 for PC.
PassFinder AP2620 VoIP Gateway , Release 1.00 Voice Interface Connection FXS/FXO port can be connected to proper equipment using RJ-11 connector. Usually FXS is connected to subscribers’ handset and FXO is connected to PBX extension. Because E&M port has a different PIN array, please check the cable specification at 4th chapter Appendix.
PassFinder AP2620 VoIP Gateway , Release 1.00 E1 Interface Connection Usually E1 VoIP module interworks with PBX through digital E1 line. APVI-1E1 VoIP Digital E1 Interface module supports ISDN-PRI, MFCR2, DTMF signaling and accommodate maximum 30 voice channels.
PassFinder AP2620 VoIP Gateway , Release 1.00 Connection for AP2620 Interfaces The below figure is an example of VoiceFinder AP2620 Gateway Interface connection.
PassFinder AP2620 VoIP Gateway , Release 1.00 Chapter 4. Power Supply and Check Operational Status AP2620 Gateway Booting and Operation When power is supplied, the system is booted as described below. z VoiceFinder AP2620 Gateway performs a self-test and checks basic operations of the CPU, the memory and interfaces. z The boot loader is executed, and the boot loader seeks for proper software image files. The boot loader loads the broadcasting system software from the flash memory.
PassFinder AP2620 VoIP Gateway , Release 1.00 Use Console Terminal with HyperTerminal z To use a PC as a Console terminal, the communication emulator application should be installed. When the PC is MS-Windows line, use the HyperTerminal Application.
PassFinder AP2620 VoIP Gateway , Release 1.00 z Assign a name to the connection. “AddPac” is used at the below example.
PassFinder AP2620 VoIP Gateway , Release 1.00 Select the interface whether the Console cable is connected. Typically, the Console cable is connected to the RS-232C 9Pin Serial Port, so select the right port according to the user environment. “COM1” is selected at the below example.
PassFinder AP2620 VoIP Gateway , Release 1.00 z Set the port information. The below examples is based on “COM1” port.
PassFinder AP2620 VoIP Gateway , Release 1.00 z After the configuration, press “Enter” button, then the below message will be displayed on the HyperTerminal. This message shows the routing S/W version, Gateway H/W test result, memory and etc. System Boot Loader, Version 2.2.4/WD [264MHz] Copyright (c) by AddPac Technology Co., Ltd. Since 1999. System Bootstrap, Version 1.
PassFinder AP2620 VoIP Gateway , Release 1.00 The system is not configured yet or backup data is invalid. Please login to system as a "root" and make configuration. Flash ROM size is too small for IVR system Voice Module Ready DSP S/W download (0): .... OK DSP S/W download (1): .... OK The System is ready. Please login to system. VoipGateway::Init1 - No IP address on the VoIP Interface PS(0) install .... OK PS(1) install ....
PassFinder AP2620 VoIP Gateway , Release 1.00 Chapter 5. Appendix Cable Specification This Appendix provides information about the Pinout specifications of the following cables used with VoiceFinder AP2620 Gateway. z Console Port Signal and Pinout (RJ-45 to DB9) z Ethernet Cable Assemble (RJ-45 to RJ-45) Pinout [ Console Port Signal & Pinout ] In order to connect the gateway console port with the Terminal Emulating PC, the RJ-45 to DB9 (Female DTE Connector) cable is used.
PassFinder AP2620 VoIP Gateway , Release 1.00 [UTP cable (RJ-45 to RJ-45) Pinout] In order to connect the gateway with other equipments (i.e. HUB), the RJ45 to RJ-45 Ethernet Cable is used. The RJ-45 Connector Pin sequence is provided below and the transferred signal and Pinout specifications are enlisted at the below table.
PassFinder AP2620 VoIP Gateway , Release 1.00 [E1/T1 Cable (RJ-45 to PBX) Pinout] y Addpac E1/T1 can be connected with RJ45 cable. RJ45 pin array is as below, PBX’s RX is assigned for RJ45 pin 1 and 2, TX is for pin 4 and 5.
