User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
85 -
[Procedures]
Order Description
1 Go to the configuration mode.
2 Enable RIP Process.
3 Move to Interface Configuratino mode.
4 Move to IP Configuration mode.
5
Enable RIP protocol for the interface to use RIP
(If necessary) Set the RIP Version to use.)
6 (If necessary) Change the RIP configuration.
7 Set other necessary parameters. (EX. authentication).
8 Make the Main Interface ‘Up”.
9
Use “show” command and check if the route is correctly set in the
routing table.
10 With “Ping” command, check if the route can reach the network.
11
(For abnormal operation) Find and recover faults with “debug”
command.
1. VoiceFinder AP2120 Gateway supports Authentication among RIP Neighbor.
(Supports Simple Text type and MD5 Encryption.)
2. VoiceFinder AP2120 Gateway can Enable/Disable the Split-Horizon,
Holddown-time, Poison-Reverse of each interface as RIP Option.
3. The RIP version should be defined (Version Define) for each interface. If
the version is not defined, it operates as RIP v1.
Caution