User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
57 -
ping
Sends an echo message to another network device and
tests if the echo message reaches the destination.
reboot Reboots the system.
rlogin
Establishes remote login ‘rlogin” connection that is similar
to Telnet
save
VoIP Command. Makes VoIP Configuration Script File uses
Gateway VoIP Running Configuration.
show
Shows configuration status and operating status of the
Gateway.
telnet
Logs in a neighboring network device through a virtual
terminal.
test
Tests sub-systems of the Gateway – the memory, interfaces
and so on.
traceroute Traces the path of the packet to a certain destination.
who
Checks users who are currently online in the Gateway,
login method and login time.
write Saves the Gateway configuration file.
undebug Stops execution of “debug” command.
user
Adds a Gateway user or shows user information of the
Gateway. With this command, the current user cannot
check information of the user who has higher authority
than him/herself.
[Table 4-2 Commands of the manager mode]