User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
55 -
4.2.1. Commands of the User Mode
Any person who logged in the Gateway can use commands of the user mode.
The prompts is indicated as “1router >” in the user mode.
Command Description
? Displays commands and their description currently available.
clock Diaplys system time.
exit Logs out the operator from the Gateway.
help Explains how to use the command in an interactive way.
history Shows history of the previously used commands.
ping
Sends an echo message to another network device and
tests if the echo message reaches the destination.
rlogin
Establishes rlogin connection that is similar to the Telnet by an
original login.
show
Shows configuration status and operating status of the
Gateway. However, in the user mode, “show” command
shows only limited information.
telnet
Establishes a protocol connection to log in a neighboring
network device through a virtual terminal.
traceroute Traces the path of the packet to the destination.
user
Adds a Gateway user or shows user information of the
Gateway. With this command, the current user cannot
check information of the user who has higher authority than
him/herself.
[Table 4-1Commands of the user mode]