User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
295 -
5.7.5.13. max-digits
This command is used to limit the number of digits for a user class, which in turn
adds to the security of specific out-going signal to the FXO port. The “no”
default value for this command is “0”, meaning there is no limitation.
max-digits number
no max-digits
5.7.5.13.1. Syntax
Keyword / Argument Description
number Maximum number of digits for out-going signals
5.7.5.13.2. Default Value
0
5.7.5.13.3. Command Mode
User-Class Configuration Mode
5.7.5.13.4. Example
The following describes configuring the maximum digits for user class 1 as “10”.
voice class user 1
max-digits 10
5.7.5.14. password
This command is used to configure a 4 digit security password for the security of
out-going signals to FXO port. The “no” default value for this command is “null”,
which runs no security test for all out-going signals to the FXO port. If a security
digit is configured for at least one user class, the password is checked.
password string