User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
268 -
dial peers are selected, a hunting group will be made.
If a huntstop has been set already in a certain dial peer and if the outbound
call to that dial peer fails, a call will be terminated without hunting other dial
peers.
5.7.4.7.5. Example
The following example is to perform huntstop in VoIP peer 110.
dial-peer voice 110 voip
huntstop
5.7.4.8. port
To associate a dial peer with a specific voice port, use “port” command at
dial-peer configuration command. Use the no form of this command to cancel
this association.
port slot/port
no port
5.7.4.8.1. Syntax
Keyword / Argument Description
Slot Slot number where the voice interface card is
installed. Valid entries are 1 or 0.
port Port number for voice port number of voice
interface module. Valid entries are 0 to 3.
5.7.4.8.2. Default Value
No port is configured.
5.7.4.8.3. Command Mode
Dial-Peer Configuration Mode