User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
256 -
use no command.
type { 1 | 2 | 3 | 5 }
no type
5.7.3.19.1. Syntax
Keyword / Argument 설명
1 To set Type-1 for E&M voice port. Refer to the User
Guideline for more detailed information.
2 To set Type-2 for E&M voice port. Refer to the User
Guideline for more detailed information.
3 To set Type-3 for E&M voice port. Refer to the User
Guideline for more detailed information.
5 To set Type-4 for E&M voice port. Refer to the User
Guideline for more detailed information.
5.7.3.19.2. Default Value
Type-5
5.7.3.19.3. Command Mode
Voice-port Configuration Mode (E&M)
5.7.3.19.4. Usage Guideline
The command is only applied to E&M voice ports.
E&M Type 1, 2, 3, 5 configuration is doen by Hardware Jumper Setting. However,
the administrator/user cannot check the E&M type without seeing it. To solve
this problem, use “type” command to add description on the type at the
gateway configuration file. So the administrator can check the E&M voice
port operation with the gateway configuration File checking command..
Refer to “[Figure 5-5 E&M module Jumper Setting]” of E&M Port configuration
for more detailed information.