User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
248 -
5.7.3.11.1. Syntax
Keyword / Argument Description
wink-start The calling party occupies the line with off-Hook of
E(Ear)-lead and stands by during “ wink” instruction of
M(Mouth)-lead of the called party. Then it sends
address with DTMF.
The command is for E&M Tie Trunk Interface.
This is the default value of E&M voice port.
immediate The calling party occupies the line with off-Hook of
E(Ear)-lead and sends address with DTMF.
The command is for E&M Tie Trunk Interface.
delay-dial The calling party occupies the line with off-Hook of
E(Ear)-lead. Then in a certain time, the calling party
observes the called party. If the called party is On-Hook,
the address is sent with Calling DTMF. If the Called
party is not On-Hook. It waits until the called party
becoming “ Off-Hook” and sends Address
information.
The command is for E&M Tie Trunk Interface.
5.7.3.11.2. Default Value
wink-start
5.7.3.11.3. Command Mode
Voice-port Configuration Mode
5.7.3.11.4. Usage Guideline
“signal” is applied to only Analog voice ports.
The configuration is only applied to a certain configured port.
If E&M voice port is configured as “Immediate Signaling”, the PBX mgith loose
the first part of the number. So use Delay-Dial Signaling instead of Immediate
Signaling.
Some devices have DTMF Receiver with limited digits. With this kind of