User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
215 -
5.7.2. Global Configuration Command
5.7.2.1. dial-peer hunt
To set the priorities for selecting the dial peer hunt, use “dial-peer hunt”
command on the global setup mode.
To return to the default setting, use “no” command before this command.
dial-peer hunt hunt-order-number
no dial-peer hunt
5.7.2.1.1. Syntax
Keyword / Argument
Description
hunt-order-number Priority algorithm 0 ~ 7 are applied as follows:
0 – (default) longest match, explicit preference, random
1 - longest match, explicit preference, sequential
2 - explicit preference, longest match, random
3 - explicit preference, longest match, sequential
4 – sequential, longest match, explicit preference
5 - sequential, explicit preference, longest match
6 – random
7 - sequential
5.7.2.1.2. Default value
0 – longest match, explicit preference, random
5.7.2.1.3. Command Mode
Global Configuratin mode
5.7.2.1.4. Usage Guideline
To select the outbound POTS going out of the Gateway or the VoIP dial peer,
the called party number of the inbound call and the destination pattern of the
dial peer are compared. At this time, more than one dial peers
corresponding to the called party number belong to a hunt group, and dial