User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
195 -
peer (POTS peer or VoIP peer) make following setting.
Step Command Description
1 Router# configure
Enters into the global configuration
mode.
2 Router(config)# dial-peer voice tag { pots |
VoIP }
Enters into the dial-peer configuration
mode.
The tag is the only identifier of the
dial-peer of this system, and tag
values include 0 ~ 65535.
3 Router(dial-peer-config)# translate-outgoing
{called-number | calling-number}
tag
called-number: Applies the
translation rule to the outbound
called party number.
calling-number: Applies the
translation rule to the outbound
calling party number.
The tag refers to the rule set and tag
values range from 0 to 65535.