User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
177 -
destination pattern were replaced with wildcards. This means that from access
server 10.1.2.2, calling any number string that begins with the digits "1310555"
will result in a connection to access server 10.1.1.2. This implies that access
server 10.1.1.2 services all numbers beginning with those digits.
Figure 5.2 shows how to setup a End-to-End call between Dial Peer 1 and Dial
Peer 4.
Figure 5.2 Outgoing Call in POTS Dial Peer 2’s view
To complete the end-to-end call between dial peer 1 and dial peer 4 as
illustrated in Figure 5.4 enter the following commands on router 10.1.1.2:
dial-peer voice 4 pots
destination-pattern 1310555 . . . .
port 1/0
dial-peer voice 3 voip
destination-pattern 1408555 . . . .
Session target 10.1.2.2
As explained above, call inside router is completed by selecting inbound dial
and outbound.
While the selection of Outbound Dial peer is basically decided by matching
POTS Peer and VoIP Peer with destination pattern of Dial Peer, Inbound Dial
Peer is decided by other ways.
Voice Port
IP Cloud
Source
Destination
[phone]
Dial Peer 2
POTS Call leg
VoIP Call leg
PBX
PBX
[phone]
10.1.1.2
10.1.2.2
Voice Port
Dial Peer 1
Dial Peer 3
Dial Peer 4