User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
145 -
z exit
1. Exit from the current mode, and enters into the sub- mode.
2. If the user uses “exit” command in the global configuration mode, the
user will be able to go back to the Exec mode.
z help
Describe the interactive help system..
z history
1. Show history of used commands.
2. AP2120 Gateway keeps maximum 25 histories in each mode.
3. To use a certain command again, enter “! History#.”
z hostname { host-name }
Set host name of the gateway on the network.
z interface { ethnet/Ethernet } < main-interface.sub-interface >
Set the name of the Gateway in the network.
z logging { option }
1. Set logging of the equipment.
2. For more information, refer to “4.13 Fault Handling and Debugging.”
z nat-list { option }
1. Set Network Address Translation (NAT.)
2. For more information, refer to NAT Configuration in the previous chapter.
z no {option}
An important command to negates commands that the user used or have
been set.
z queue-list { option }
1. Set the traffic queuing.
2. For more information, refer to Traffic Queuing Configuration in the
previous chapter.