User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
141 -
4.12. Gateway Management Command
This chapter describers commands used in the EXEC mode or the global
configuration mode, which are necessary for management and operation of
the Gateway in an alphabetical order. For commands regarding special
configuration of the Gateway, refer to the previous chapters.
4.12.1. Command in the EXEC Mode
[Command Formats and Optional Commands]
z clear { counters/interface/logging/utilization }
1. Reset certain functions or certain parts of the Gateway.
2. Command Options
1) counters : Clear the counters of all interfaces.
2) interface : Reset the hardware logic of a certain interface and
functions as if rebooting certain interfaces.
3) logging : Clear logging buffer. To be implemented.
4) utilization : Clear system utilization information of the Gateway.
z clock [ current/running/start ]
1. Show the system clock of the Gateway.
2. Command Options
1) current : Show current time of the Gateway.
2) running : Show total running time.
3) start: Show the time that the Gateway started operation.
3. If there is no option, all values of the three options will be displayed.
z configuration
Enter into the configuration mode.
z copy {startup-clear/running-config}
1. Save or delete configuration data.