User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
138 -
Indicates the faulty equipment when the Gateway sends trap.
z snmp system-shutdown
1. Decide to shutdown (reboot) the Gateway or not by SNMP from a
remote place
2. This command can greatly affect equipment operation in insecure
network. So be careful with this command. (This command is to be
implemented during the latter half of 2000.)
z snmp trap-authentication
When another SNMP Manager accesses to the SNMP Agent with incorrect
community-string value, this command sends authentication violation
information.
z show snmp
Show SNMP setting status.
[Example] SNMP Configuration and Usage
router# config
router(config)#
☞ In this mode, SNMP Config is possible.
router(config)# snmp community 0.0.0.0 ADDPAC-Domain1 rw
☞ Exchange information with all SNMP Managers whose
community-string is AddPac-Domain1.
router(config)# snmp host 131.23.1.1 ADDPAC-Domain v2c ☞
Send trap to the SNMP manager in “131.23.1.1” through SNMP v2c
protocol. At this time, the string is AddPac-Domain.
router(config)# snmp contact HongKilDong ☞ Send a message
indicating that the contact point is “HongKilDong” when trap occurs
router(config)# snmp location 9FlofBuilding4 ☞ Send a message
indicating that the installation location of the faulty equipment
is 9FlofBuilding4 when trap occurs
router(config)# snmp name Tac_router1 ☞ Send a message indicating
that the equipment name is Tac_Gateway1 when trap occurs