User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
137 -
interface.
7
Use “show snmp” command to check if configuration has been
correctly made.
[Related Commands and Syntax]
z snmp community <snmp-manager-ip/0.0.0.0> <community-string> {ro/rw}
1. Register the Gateway in a certain SNMP community.
2. <snmp-manager-ip/0.0.0.0> : IP address of the SNMP Manager. “0.0.0.0”
is an option that enables all NMSs that have same community-string
values to function as the manager of the SNMP.
3. Community-String : String used for authentication during SNMP
communication
4. {ro/rw} : Sets whether to only read Gateway information or read and write
setting values of the Gateway
z snmp host <trap-host-ip> <community-string> {v1/v2c}
1. Register the host to which the Gateway sends trap and the SNMP version
when trap occurs.
2. <trap-host-ip> : IP address of the trap host (SNMP manager)
3. Community-String : String to be used for authentication during SNMP
communication
4. {v1/v2c} : SNMP Version
z snmp contact <string>
Indicate the contact point (equipment manager) to solve trap problem in
case of trap.
z snmp location <string>
Indicate installation location of the faulty equipment when the Gateway
sends trap.
z snmp name <string>