User`s guide

VoiceFinder AP2120 VoIP Gateway User’s Guide Version 1.00
AddPac Technology Co., Ltd. -
131 -
2. queue-list-number : A number between “0~39”
z queue-list <queue-list-number> ip {scr/dsr} <ip-address>
{high/medium/normal/low}
1. Set up Queuing rule at queue-list. Set priority to packets having certain IP
address as Source/Destination.
2. queue-list-number : A number between “0~39”
z queue-list <queue-list-number> size <small-packet-size> <max-packet-size>
{high/medium/normal/low}
1. Set up Queuing rule at queue-list. Set priority for packets of certain size
limit (Small Packet Size, Max Packet Size).
2. queue-list-number : A number between “0~39”
z queue-list <queue-list-number> default {high /medium /normal /low}
1. Set priority for packets do not meet any conditions.
2. queue-list-number : A number between “0~39”
z queue-list <queue-list-number> qcount <high-queue-size>
<medium-queue-size> <normal-queue-size> <low-queue-size>
1. Customize the size of each Queue.
2. Default Queue Size is 20.
3. The Default Queue should be set. If not, the packets do not meet the
condition are discarded.
z queue-group <queue-list-number>
1. Apply the Queue-List to certain interface.
2. Queue-List can be applied to Ethernet Interface.
z show queue-list [<queue-list-number>]
Show Queue-List.
z show running-config / show interface Ethernet <interface-number>
Show Queue-List applied to the interface.