User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
318 -
Configuration 4 - PSTN Access Using FXO connection
Description) Gateway B is directly connected to Phone B through FXS.
PSTN is directly connected to GatewayA through FXO.
Phone B and PSTN user can call each other through FXO. In Gateway A.
AP200-A configuration
step 1) set interface
step 2) set default routing
step 3) set POTS Peer
Step 4)set VoIP Peer
생략
Step 5) configuration confirmation
Gateway(config)# show dial-peer voice
POTS Peers :
Pots peer 100
dest-pattern = 100
port = 1/0 (0)
prefix =
register E.164 = yes
administrative status = up
VoIP Peers :
LAN HUB
E0.0
10.10.10.1
S0
S0
FXO
AP200
-
A
AP200-B
E0.0
20.20.20.1
FXS
Dial Peer 101 POTS
Voice PORT 1/0
Destination 100
Phone B
Dial Peer 200 POTS
Voice PORT 0/0
Destination 200
IP
Network
PSTN
Phone A
PSTN User