User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
284 -
voice service VoIP
security permit-FXO
5.7.5.26. signaling-port
5.7.5.27. timeout
To set VoIP-related timer parameters, use “timeout” command in the voice
service setup mode. To return this setup to the default state, use “no”
command before this command.
timeout { t301 | t303 | tras | tttl | tidt | treg } value
no timeout { t301 | t303 | tras | tttl | tidt | treg }
5.7.5.27.1. Syntax
Keyword / Argument Description
t301 value Timeout value from Q.931 Alert message reception
till Connect message reception. Values range
from 5 to 600, and the default is 180. T301 value is
expressed in seconds.
t303 value Timeout value from Q.931 Setup message
transmission till initial message reception. Values
range from 5 to 60 and the default value is 8. T303
value is expressed in seconds.
tras value Timeout value from RAS message transmission till
reply message reception. Values range from 2 to
30, and the default value is 6. Tras value is
expressed in seconds.
tttl value RAS time-to-live timeout value. Values range from
10 to 600, and the default value is 60. Values are
expressed in seconds. This value is updated by
the gatekeeper.
tidt value Inter-digit timeout value to enter digits into the
analog voice port. Values range from 1 to 600,
and the default value is 10. Tidt value is expressed
in seconds.
treg value Timeout value for re-registration attempt upon
registration failure in the gatekeeper. Values
range from 10 to 600 and the default value is 30.
Treg value is expressed in seconds.