User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
274 -
5.7.5.18. h323 call response
If you want to define message besides ALERT message after call proceeding
message about response Q.931 setup message, use h323 call response
command in voice service configuration mode. To return default configuration
mode, use the no form of this command.
h323 call response { alert| progress | none}
no h323 call response
5.7.5.18.1. Syntax
Keyword / Argument Description
alert Sending ALERT message as response message.
progress Sending PROGRESS message as response message.
none Sending CONNECT message as response message
after CALL PROCEEDING.
5.7.5.18.2. Default Value
The default status value is alert mode.
5.7.5.18.3. Command Mode
Voice-Service Configuration Mode
5.7.5.18.4. Usage Guideline
This command supports to setup configuration for one of global voice service
parts for VoIP service. The AP200 VoIP gateway is able to send message
whether gateway send ALERT or PROGRESS message according to command
configuration before completing CONNECT message after sending call
proceeding message when gateway operate as receiving gateway side with
getting setup message. This command configuration setting recommend