User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
27 -
AP200-C Type Model
Figure 1-9 shows the “Type C” Interface configuration of AP200 VoIP
Residential Gateway. (AP200 Model C)
[Figure 1-9 Back Side Panel Diagram of VoiceFinder AP200 Model C VoIP RGW]
Following Table 1-4 explains the “Type C” interface of AP200 VoIP Residential
Gateway.
[Table 1-4 The explanation of Back Side Panel Interfaces of AP200 Model C
RGW]
Following Figure 1-10 shows the Back panel interface picture of AP200 Model C
VoIP Residential Gateway.
Power PSTN FXS0 FXS1 LAN0 LAN1 CONSOLE
No. Interface Explanation
(1)
DC Power
External DC Power Supply Input. (DC 5V)
(2)
PSTN
This port is used to connect PSTN Analog Line for
PSTN backup. (RJ11)
(3)
FXS 0
1 FXS Port : As FXS Voice Interface Port, Phone
or Fax Machine can be connected.(1x RJ11)
(4)
LAN0
10Mbps Ethernet Port for WAN interface. (RJ45)
(5)
LAN1
10Mbps Ethernet Port for LAN interface. (RJ45)
(6)
Console
RS-232C serial port for system management.
(RJ45)