User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
269 -
gatekeeper is discovered, use the gkip command in gateway configuration
mode.
gkip ip-addr [port] [priority]
no gkip ip-addr
5.7.5.14.1. Syntax
Keyword / Argument Description
ip-addr The gatekeeper discovery message will be unicast
to this address. and, optionally, the UDP port
specified.(Default Port Value is 1719)
port Optionally, the UDP port of gatekeeper
specified.(Default Port Value is 1719)
priority Optionally designates priorities of several alternate
gatekeepers. The priority value ranges from 0 to
254, and the lower the value is, the higher the
priority is. The default priority is 128.
5.7.5.14.2. Default Value
No gatekeeper is configured for the proxy.
5.7.5.14.3. Command Mode
Gateway Configuration Mode
5.7.5.14.4. Usage Guideline
The VoIP gateway is registered in the gatekeeper that is the Registration
Admission and Status (RAS) server and receives the charging service. The
AP200 VoIP Gateway can designate maximum ten gatekeepers in a gateway
using this command. To view the list of the gatekeepers, use “show gateway”
command. If more than one gateway is designated, gateways try to register
themselves in the gatekeeper using the GRQ message according to their
priorities. There is only one gatekeeper that can be registered at the same
time. When a gateway receives the re-registration failure message or does
not receive any message, the next gateway tries to register itself in the
gatekeeper.