User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
262 -
starth245 call procedure if TCP connection for H.245 procedure is not OK
before CONNECT message.
5.7.5.8.5. Example
Following example shows that force-starth245 command activates the
startH245 VoIP signaling procedure.
voice service voip
force-starth245
5.7.5.9. h323 call start
To force the H.323 Version 2 gateway to use Fast Connect or Slow Connect
procedures for all H.323 calls, use the h323 call start command in voice-service
configuration mode. To restore the default condition, use the no form of this
command.
h323 call start { fast | slow | preferred-slow }
no h323 call start
5.7.5.9.1. Syntax
Keyword / Argument Description
fast Gateway uses H.323 Version 2 (Fast Connect)
procedures
slow Gateway uses H.323 Version 1 (Slow Connect)
procedures.
preferred-slow If you configure this option, at the time to make a
call, Gateway use slow start (normal start)
procedure. At the time to receive a call, Gateway
use slow start (normal start) or fast start procedure
depends on calling party’s configuration.
5.7.5.9.2. Default Value
The default is fast.