User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
230 -
5.7.4. Dial Peer Commands
5.7.4.1. answer-address
To find the VoIP dial peer for the VoIP inbound call incoming to the network as
using the calling party number of the inbound call, use “answer-address”
command in the dial-peer setup mode. To disable the number that has been
set, use “no” command before “answer-address” command.
answer-address string
no answer-address
5.7.4.1.1. Syntax
Keyword / Argument Description
String
Number string defined in the E.164 or private
telephone number plan. Numeric data (0 to 9)
“#” and “*” can be used.
z (*) & (#): These characters can be found on the
standard button-type telephone. They cannot
be located at the first place of the string. (For
example, *650 is invalid.)
z (.): The period means a value that can match
with any numeric entered. In other words, the
period cannot be placed at the first place of
the string. (For example, .650 is invalid.)
z ([]): Brackets are to indicate the range. The
Range is the character sequence within the
bracket and only numeric data (0 to 9) can be
used for the range. This is similar to the regular
expression rule.
5.7.4.1.2. Default Value
The default is null string.
5.7.4.1.3. Command Mode
Dial-peer setup mode (VoIP dial peer)
5.7.4.1.4. Usage Guideline
This command is applied to the VoIP dial peer of the AP200 VoIP Gateway.