User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
200 -
5.7.2.3.5. Example
The following example configures # as the special terminating character for
variable-length dialed-numbers:
configure
dial-peer terminator #
5.7.2.4. dial-peer voice
To enter dial-peer configuration mode (and specify the method of
voice-related encapsulation), use the dial-peer voice global configuration
command.
dial-peer voice number {VoIP/pots}
5.7.2.4.1. Syntax
Keyword / Argument Description
number
Digit(s) defining a particular dial peer. Valid entries
are from 1 to 2147483647.
VoIP
Indicates that this is a VoIP peer using voice
encapsulation on the POTS network.
pots
Indicates that this is a POTS peer using Voice over
IP encapsulation on the IP backbone.
5.7.2.4.2. Default Value
No Default Value
5.7.2.4.3. Command Mode
Global Configuration Mode
5.7.2.4.4. Usage Guideline
Use the dial-peer voice global configuration command to switch to the
dial-peer configuration mode from the global configuration mode. Use the exit
command to exit the dial-peer configuration mode and return to the global