User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
183 -
5.5.3. FAX Relay setting by Bypass
To set fax relay with G.711 PCM clean channel in addition of T.38 fax relay, use
following commands in Global Configuration Mode. To do fax relay in this
mode voice channel shall be opened with g711alaw or g711ulaw. So, codec
and codec-class setting of dial-peer needs to support g711alaw or g711ulaw
interface and counterpart needs to set in G.711 mode.
Step Command Description
1 Router(config)#voice service VoIP
Converts into Voice Service Setting Mode
2 Router(config-vservice-VoIP)#fax
protocol bypass
z Sets Global default FAX protocol
3 Router(config-vservice-VoIP)#exit
z Exits from Voice-Service Setting
Mode and return to Global setting
Mode