User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
180 -
5.4.2.2. Activating/Deactivating the Voice Ports
To activate a voice port, use the following commands in voice-port
configuration mode:
Step Command Description
1 no shutdown
Activate the voice port
To cycle a voice port, use the following command in voice-port configuration
mode
Step Command Description
1 voice-port location
Identify the voice port you want to activate and
enter the voice-port configuration mode.
2 no shutdown
Activate the voice port.
5.5. FAX Application
5.5.1. T.38 FAX Relay using VoIP H.323
The T.38 Fax Relay for VoIP H.323 feature provides standards-based fax relay
protocol support on the most of VoIP router or Gateway including AP200.
Because the T.38 fax relay protocol is standards based, TN2520 can
interoperate with third-party T.38-enabled gateways and gatekeepers in a
mixed-vendor network when real-time fax relay capabilities are required.
Figure 5.9 shows an IP H.323 network with TN2520 routers and third-party
gateways and gatekeepers using T.38 fax relay functionality. By using T.38 fax