User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1

AddPac Technology Co.,Ltd. -

174 -

5.3.9. Call Transfer Related Command Setting

Generally, PBX supports call transfer function when VoIP gateway provides the

VoIP service via PBX. However, if analog phone is connected to VoIP

gateway’s FXS ports directly, AddPac VoIP gateway supports the call transfer

function for PBX’s call transfer function role.

AddPac VoIP gateway supports the call transfer service as a default function

or activates the call transfer service using following commands

dial-peer call-transfer h

In above example, call transfer function is activated by hook-flash. If user wants

to deactivate the call transfer function, no dial-peer call-transfer or dial-peer

call-transfer n commands can be used.

To explain the call transfer function, we should know called partys that

participate the call transfer scenario. Basically, call transfer scenario is

extension of call hold scenario.

In Figure 5-3-9, in first step, Call AB is occurred between user A and user B, in

second step, Call BC is occurred between user B and user C by user B

hook-flash, in final step, Call AC is occurred between user A and user C by user

B hook-on

STEP Commands Explanation

Router#

configure

Enter into configuration setting mode

Router(config)#

dial-peer call-transfer

<h>

<n>

Call-transfer Operating Mode

h : hookflash

n : no action