User`s guide

VoiceFinder AP200 VoIP Residential Gateway (RGW) User’s Guide Version 1.1
AddPac Technology Co.,Ltd. -
137 -
4.15. Auto-Upgrade
When the software (firmware) of AP200 VoIP gateway is upgraded or changed, auto-upgrade
feature reduces the time-consuming point-to-point S/W upgrading JOB via human being at
remote side or local site. The point-to-point S/W upgrading at remote side is impossible
practically if the deployed VoIP equipment number is large. This means the maintenance cost
will be reduced if automatic S/W feature without human being intervene is available.
Generally, when the VoIP gateways are deployed at customer sites via VoIP service provider,
VoIP service provider needs a lot of cost for VoIP equipment H/W and S/W maintenance.
Among these maintenance cost, S/W upgrading cost is mostly charged.
STEP Commands Explanation
1
Router#
configure
Enter to the configuration mode
2
Router(config)#
auto-upgrade
{action|authentication|auto-reboot|
interval|proxy|url|verbose}
action : Auto-Upgrade timing
(display after URL input)
authentication : Web server
(auto upgrade server) Login Name
/Password
auto-Reboot : rebooting decision after
image upgrade
interval : Retrial time at Failure, Success
proxy : proxy server IP Address setting
url : Web server (auto upgrade server) url
setting
verbose : display the status message at
upgrade