User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
83 -
z dhcp-list <dhcp-list-number> address relay < relay-IP-address>
1. Sets that the Gateway should send broadcast DHCP protocol to an
equipment of the relay-ip-address through Unicast.
2. relay-IP-address: IP address of the equipment that is going to transfer
DHCP broadcast through Unicast
z dhcp-list <dhcp-list-number> address server <start-IP-address>
<end-ip-address>
1. Sets DHCP pool that the Gateway can function as a DHCP server.
2. <start-IP-address>,<end-IP-address>: Defines IP address range of the
DHCP pool.
z dhcp-group <dhcp-list-number>
As an interface command, binds DHCP-list with the interface to use.
z ip address dhcp
Set ip address with DHCP Clients to the interface to use.
z show dhcp-list [dhcp-list-number]
Shows a certain DHCP list or whole DHCP configuration.
z show running-config
Shows configuration contents in which DHCP is included.
Optional Commands
z dhcp-list <dhcp-list-number> option [option command]
1. Sets options used in the DHCP-list set in the Gateway.
2. Optional Commands
1) arp-cache-timeout <time(second)>: Sets time value that the ARP
cache table can keep the Mac address.
2) default-ip-ttl <time(second)>: Sets IP TTL value of the packet.
3) dhcp-lease-time <time(second)>: Sets time value to check how
long each IP address allocated by the DHCP server is valid. The