User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
51 -
[Procedure]
Order
Operation
1 Enter into the interface configuration mode.
2 Give PPP encapsulation protocol to the interface.
3 Move to the IP configuration mode.
4 Give an IP address to the interface.
5 Enable CHAP or PAP authentication. (Optional)
6 Set CHAP or PAP parameters. (Optional)
7 Set PPP default peer IP. (Optional)
8
(If necessary) use “debug” command to check if the Gateway is
normally operating.
9 Make the interface up.
10
With “show interface” command, check if the interface is normally
operating.
11
(For abnormal operation) find faults and recover faults as using
“debug” command.
[Related Commands and Syntax]
z interface { Ethernet / serial } { 0 / 1 }
Selects the interface to set up and enters into the interface configuration
mode.
z encapsulation { hdlc / ppp / frame-relay }
Sets the serial encapsulation mode for the interface.
z Ip
address <ip_address> <net_mask>
Selects the corresponding interface and enters into the IP related
configuration mode.
z user add <username> <password> {admin/high/normal/low}
1. Sets the login name and the password to authenticate a Gateway that
is trying to access to another Gateway that function as a PPP
PAP/CHAP server.