User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1

AddPac Technology Co., Ltd. -

45 -

4.3. Starting Gateway Configuration

To set up the Gateway, log in the configuration mode. To log in the

configuration mode, the user shall know the manager password. If the user

does not know proper commands, the user can use “Help” or “?” function.

[Procedure]

Order Operation and Related Commands

1 Boot the Gateway and log in with the manager’s account.

2 Move to the configuration mode.

1 Gateway# configure

2 Gateway(config)#

[Example] Starting Gateway Configuration Mode

The System is ready. Please login to system.

☞ Enter the manager’s account. (The manager’s ID is

set as “root” in the factory.)

password:****** ☞ Enter the password. (The password is set as

“router” in the factory.)

AP1100 Login: root at Console on Thu Jan 11 11:28:34 2001

1 router# configure

☞ Enter the command to move to the configuration

mode.

1 router(config)# ☞ Configuration is possible in this mode