User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
301 -
Appendix D Cable Specifications
This Appendix provides information about the Pinout specifications of the
following cables used with the VoiceFinder 1100 Gateway.
z Console Port Signal and Pinout(RJ-45 to DB9)
z Ethernet Cable Assemble(RJ-45 to RJ-45) Pinout
[ Console Port Signal and Pinout ]
In order to connect the Gateway console port with the Terminal Emulating PC,
the RJ-45 to DB9(Female DTE Connector) cable is used. The transferred signal
and Pinout specifications are enlisted in the following Table C-1 “Console Port
Signal and Pinout”.
Gateway Console
(DTE)
RJ-45 DB-9
Console Device
(PC)
Signal RJ-45 Pin DB-9 Pin Signal
RTS 1 8 CTS
DTR 2 6 DSR
TxD 3 2 RxD
GND 4 5 GND
GND 5 5 GND
RxD 6 3 TxD
DSR 7 4 DTR
CTS 8 7 RTS
Table D-1 “Console Port Signal and Pinout” ]