User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
243 -
5.7.5.12.3. Command Mode
Voice-Service Configuration Mode
5.7.5.12.4. Usage Guideline
This command supports to setup configuration for one of global voice service
parts for VoIP service. The AP1100 VoIP gateway is able to send message
whether gateway send ALERT or PROGRESS message according to command
configuration before completing CONNECT message after sending call
proceeding message when gateway operate as receiving gateway side with
getting setup message. This command configuration setting recommend
default mode besides special case.
5.7.5.12.5. Examples
The following command example shows how to make configuration response
message to change progress message.
voice service VoIP
h323 call response progress
5.7.5.13. max-digits
This command is used to limit the number of digits for a user class, which in turn
adds to the security of specific out-going signal to the FXO port. The “no”
default value for this command is “0”, meaning there is no limitation.
max-digits number
no max-digits