User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
242 -
It may be possible to cut a front of real voice sound in case of opening voice
channel after CONNECT message with hooking off other side under default
configuration late mode. To avoid this phenomenon, use h323 call channel
early mode to open voice channel before other side hooking off.
5.7.5.11.5. Examples
The following command example shows fast voice channels
voice service VoIP
h323 call channel early
5.7.5.12. h323 call response
If you want to define message besides ALERT message after call proceeding
message about response Q.931 setup message, use h323 call response
command in voice service configuration mode. To return default configuration
mode, use the no form of this command.
h323 call response { alert| progress | none}
no h323 call response
5.7.5.12.1. Syntax
Keyword / Argument Description
alert Sending ALERT message as response message.
progress Sending PROGRESS message as response message.
none Sending CONNECT message as response message
after CALL PROCEEDING.
5.7.5.12.2. Default Value
The default status value is alert mode.