User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
220 -
5.7.4.10.1. Syntax
Keyword / Argument Description
string Integers representing the prefix of the telephone
number associated with the specified dial peer.
Valid numbers are 0 through 9, and a comma (,).
Use a comma to include a pause in the prefix.
(max length 55)
5.7.4.10.2. Default Value
Null string.
5.7.4.10.3. Command Mode
Dial-Peer Configuration Mode
5.7.4.10.4. Usage Guideline
Use the prefix command to specify a prefix for a specific dial peer. When an
outgoing call is initiated to this dial peer, the prefix string value is sent to the
telephony interface first, before the telephone number associated with the dial
peer.
If you want to configure different prefixes for dialed numbers on the same
interface, you need to configure different dial peers.
5.7.4.10.5. Examples
The following example specifies a prefix of "9" and then a pause:
dial-peer voice 10 pots
prefix 9,
5.7.4.11. register
To configure a gateway to register or deregister a fully qualified POTS dial-peer