User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
216 -
5.7.4.7.4. Usage Guideline
If an outbound dial peer is selected for an inbound call and if more than one
dial peers are selected, a hunting group will be made.
If a huntstop has been set already in a certain dial peer and if the outbound
call to that dial peer fails, a call will be terminated without hunting other dial
peers.
5.7.4.7.5. Examples
The following example is to perform huntstop in VoIP peer 110.
dial-peer voice 110 VoIP
huntstop
5.7.4.8. port
To associate a dial peer with a specific voice port, use the port dial-peer
configuration command. Use the no form of this command to cancel this
association.
port slot/port
no port
5.7.4.8.1. Syntax
Keyword / Argument Description
Slot Slot number where the voice interface card is
installed. Valid entries are 1 or 0.
port Port number for voice port number of voice
interface module. Valid entries are 1 to 7.
5.7.4.8.2. Default Value
No port is configured.