User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
199 -
5.7.3.5.5. Examples
The following example configures a 3-decibel gain to be inserted at the
receiver side of the interface in the router:.
port 1/4
input gain 3
5.7.3.6. output gain
To configure a specific output gain value, use the output gain voice-port
configuration command. Use the no form of this command to disable the
selected output gain value.
output gain value
no output gain value
5.7.3.6.1. Syntax
Keyword / Argument Description
value
The amount of gain in decibels at the transmit side
of the interface.
Acceptable value is any integer from -31 to 31.
The default value for FXO, FXS, and E&M ports is 0..
5.7.3.6.2. Default Value
0
5.7.3.6.3. Command Mode
Voice-port configuration Mode
5.7.3.6.4. Usage Guideline
A system-wide loss plan must be implemented using both input gain and output
gain commands. Other equipment (including PBXs) in the system must be