User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
184 -
from 0 to 1, depending on the voice interface card
you have installed.
port
Specifies the voice port. valid entries are 0 to 3.
5.7.2.8.2. Default Value
No Default Value
5.7.2.8.3. Command Mode
Global Configuration Mode
5.7.2.8.4. Usage Guideline
Use the voice-port configuration command to switch to the voice-port
configuration mode form the global configuration mode. Use the exit
command to exit the voice-port configuration mode and return to the global
configuration mode.
For more information about the physical characteristics of your voice network
module, or how to install it, refer to the installation documentation that came
with your voice network module.
5.7.2.8.5. Examples
The following example accesses the voice-port configuration mode for slot 1
and port 3:
configure
voice-port 1/3
5.7.2.9. voice class clear-down-tone
To configure clear down tone on the FXO port, use the voice class
clear-down-tone global configuration command.