User`s guide

VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1
AddPac Technology Co., Ltd. -
156 -
(PLAR) connection, if this voice port is used for a PLAR
connection. The string value specifies the destination
telephone number.
5 description string
(Optional) Attach descriptive text about this
voice port connection.
6 input gain value
Specify (in decibels) the amount of gain to be inserted
at the receiver side of the interface. Acceptable
values are from -31 to 31.
7
output gain
value
Specify (in decibels) the amount of gain at the
transmit side of the interface.
5.4.2.2. Activating/Deactivating the Voice Ports
To activate a voice port, use the following commands in voice-port
configuration mode:
Step Command Description
1 no shutdown
Activate the voice port
To cycle a voice port, use the following command in voice-port configuration
mode
Step Command Description
1 voice-port location
Identify the voice port you want to activate and
enter the voice-port configuration mode.
2 no shutdown
Activate the voice port.